Join Eric Wing for an in-depth discussion in this video Placing foundation slabs, part of Creating Concrete Buildings with Revit Structure.
…Sometimes we're going to run into situations just like we have here…with an elevator shaft or a predefined footing just doesn't cut it.…We may need to be able to just sketch out…our foundation and have it behave like a bearing footing.…So, by clicking the Foundation Slab button, we'll add…a thickened foundation to the bottom of our elevator shaft.…This slab will act like a foundation once we are done placing it into the model.…So, to get started, in the project browser, let's go to Structural Plans.…
Let's go all the way down to our top of footing.…For a elevator pit, let's go ahead and…place a giant chunk of concrete underneath here.…To do that, let's go to the Structure tab.…Now, let's click the Slab drop-down.…Let's go Structural Foundation Slab.…Notice that you can place a Floor Slab…Edge, which is identical to this Floor Slab Edge.…So, click the Slab drop-down, let's go to Structural Foundation Slab.…Let's click the drop-down and see what thicknesses we have.…Luckily, we have a predefined 12" Foundation…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.