Join Eric Wing for an in-depth discussion in this video Creating step footings, part of Creating Concrete Buildings with Revit Structure.
…It would be nice if all our buildings were built on a perfectly flat terrain.…Unfortunately, they are not.…There always comes the time when we need to model a step footing situation.…By actually editing the profile of the structural foundation wall, we're…going to create a situation where the walls and the footings are stepped.…Because Revit knows that wall footings can only exist under a foundation wall, Revit…has no choice but to break and step the bearing footing with the wall profile.…For structural plans, let's go down to level one.…Zoom in on the west elevation and double-click on it.…
Now, what we're going to do is we're going to…literally edit the profile of this wall right here.…Go ahead and select the wall.…Now let's click Edit Profile.…Now we can basically draft out how the wall…has been a step down and then back up again.…So under the Modify Walls Edit Profile tab,…on the Draw panel, click the Line button.…Zoom in to this area.…Let's come out about six feet.…Let's draw a line straight down two feet.…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.