Join Eric Wing for an in-depth discussion in this video Creating perimeter framing, part of Creating Concrete Buildings with Revit Structure.
…There's a misconception out there that Revit does steel well but, nothing else.…I started using Revit structure for weird, complex, concrete buildings.…This is about 12 years ago and I'm still using it for weird, concrete structures.…Although this video was framing in only a…small square building, all of the framing rules apply.…The objective of this video, is to add…concrete perimeter framing, to our second floor structure.…In Revit, under the structural plans in the…project browser, let's bounce up to level two.…In level two we're going to start placing our framing.…
To do that, go to the Structure tab.…On the Structure tab, click the Beam button.…Let's click the Type Selector drop down.…And let's see what we've got.…Let's grab the 12 by 24.…Now on our options toolbar, placement plane is level two.…Structural usage will be automatic.…Let's not check on 3D snapping, let's make sure the chain button is checked on.…Let's start going around the horn.…I'm going to click on spot right on the mid point to that column.…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.