Join Eric Wing for an in-depth discussion in this video Building rebar cages, part of Creating Concrete Buildings with Revit Structure.
- View Offline
- Exercise Files
…Let's actually use one of the shapes in the rebar shape browser.…To add a rebar cage, we can do one of two things.…One is we can sketch in the cage.…Two is we can use a predefined shape.…Of course, once we grab the shape we need, we can add the spacing as we see fit.…This video, we'll focus on the cage.…We'll add rebar to a structural pier by selecting a pre-defined rebar shape.…Then we'll add some vertical dowels at the four corners.…So to get started, let's go down to level…one in our structural plans in the project browser.…
I'm…going to scroll over to this column right here.…On the view tab, let's select call out.…I'm going to pick a window right around this pier.…I'm going to open up my column in the properties I'm going to…scroll down to view name, I'm going to call it typical column cage.…I'm going to hit enter.…I'm going to change to 3/4 of an inch equals a foot.…Now I'm going to go ahead and select my column.…On the reinforcement panel, I'm going to click the rebar button.…In my project browser, I'm going to scroll down til I find.…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.