Join Eric Wing for an in-depth discussion in this video Adding strip footings, part of Creating Concrete Buildings with Revit Structure.
…Footings in Revit are quite intuitive.…Revit actually calls script footings, wall footings.…It's a tad misleading when you're clicking the button but, once you click it,…Revit makes you select the wall that is going to be bearing on your footing.…So, to get started, let's open up our model and follow along.…And let's go down to the top of footing structural plan in the project browser.…The objective is to place a footing all the way around this perimeter.…So on your Structure tab, on the…Foundation panel, let's click on Structural Foundation Wall.…
It's not a wall, it's a footing that goes underneath a wall.…We have a wall foundation bearing footing.…Let's click on Edit Type.…Let's click on Duplicate.…This is going to be a Bearing Footing, 32" by 32".…Let's hit OK.…For the width, let's type in 32".…Now let's hit OK.…Now what we can do, if we look all the way down in the lower left-hand corner, notice…Revit kind of has a command prompt, it wants…us to select walls to place wall foundations under.…
So let's go ahead and select, the first…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.