Join Eric Wing for an in-depth discussion in this video Adding retaining-wall footings, part of Creating Concrete Buildings with Revit Structure.
…So let's look at retaining wall footings.…I'd say Revit has pretty much thought of everything.…Yes, of course there's a retaining footing.…Different from the bearing footing, a retaining footing let's…us specify a toe and heel length, allowing us…to place it under the center of the retaining…wall and to be offset from one side to another.…Let's actually go down to the top of footing.…All we can see here is our retaining wall, but that's okay.…What I'd like to do is go to the structure tab.…Let's select wall.…So for wall foundation instead of baring footing,…let's click on the type selector drop down.…
Lets go to repining footing, 24 by 12 by 12.…Now, let's click…on edit type.…The structural material is Concrete Cast-in-Place grey.…The structural usage is Retaining.…Now, we have some different parameters, than the normal barring footing.…We have a toe length, a heel length, a thickness, and an end extension length.…Let's keep all of these to the default, because this is about what I want.…If you wanted to change it, of course you would…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.