Join Eric Wing for an in-depth discussion in this video Adding rebar by sketching, part of Creating Concrete Buildings with Revit Structure.
…There are going to be times when the default rebar shapes simply…don't cover it and we need to just sketch it in.…This can be done.…Say we have some dowels or we're tying a concrete pan joist into a slab.…Revit allows us to do that.…The objective of this video is to add dowels…to our foundations and framing by using the bi-sketch option.…To get started let's go to our project browser.…Let's go down to our top of footing.…Let's double click on our section right here.…What I want to do is start putting some stretched rebar into this area.…Go ahead and select your foundation wall.…Click on the rebar button.…
Now what we need to do is click on sketch rebar.…For some reason this confuses Revit.…we need to go back in and select…the foundation wall, now we can start sketching away.…What I'm going to do is come down to my footing here.…I want to pick a point, like, right around here.…I'm going to start drawing it straight down right into my footing.…I can go right down to the ground if I want to.…I'm not going to.…I'm going to come down to about this bottom cover.…
- Creating levels
- Creating a structural grid
- Adding single and multiple columns
- Laying foundations
- Creating perimeter framing and pan joists
- Placing concrete slabs
- Reinforcing with rebar
Skill Level Intermediate
1. Setting the Stage
4. Concrete Framing
5. Structural Slabs
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.