From the course: Revit 2019: Essential Training for MEP (Imperial)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Tagging items - Revit MEP Tutorial
From the course: Revit 2019: Essential Training for MEP (Imperial)
Tagging items
- [Instructor] Let's take a moment to tag our pipes. We're going to tag our pipes with the correct sizes. Another procedure we're going to introduce now is tag the invert elevation from the bottom of the pipe. To get started, let's go to sprinkler, floor plan, one sprinkler. Let's go into the mechanical room. On the quick access toolbar, select the tag by category button, pick your pipe, pick a point right here, and pick a point off of there. Hit Escape a couple times. You can always adjust the bubble where it's going to land. So if it doesn't quite put it where you want it, just go ahead and drag it down and move it onto your pipe. Go ahead and right-click on the 12 inch and create similar. Pick a point here. And as it reduces, keep tagging it. Make sure you tag it here. And when it does that, you might be good and used to having to change it. Hit Escape a couple of times. And the next step that we're going to do is a little bit different. What I'd like to do is tag the invert…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
Creating a sprinkler view2m 5s
-
(Locked)
Adding sprinklers3m
-
(Locked)
Creating sprinkler pipe types3m 8s
-
(Locked)
Modeling mains4m 51s
-
(Locked)
Modeling branch lines5m 12s
-
(Locked)
Adding pipe accessories2m 42s
-
(Locked)
Tagging items3m 31s
-
(Locked)
Adding specialty Items2m 12s
-
(Locked)
Creating a fire alarm circuit2m 47s
-
(Locked)
Adding fire alarm devices2m 47s
-
-
-
-