Join Eric Wing for an in-depth discussion in this video Including a firefighter's control and indicating panel, part of Fire-Alarm Systems Design with Revit.
- Other panels, such as firefighter's…indicating panels, can easily be added…to our models as well.…I may have mentioned it, but these kinds…of items are almost always provided…by the manufacturer these days.…The objective of this video is to find…the stock Revit panels and place one…in our model in the electrical room.…Let's scroll in on the electrical room.…We already have two panels in here,…and I'm going to throw another one in on this wall.…Let's go to the systems tab.…Let's click on electrical equipment.…
Let's click load family.…Let's go to electrical.…Let's go to MEP,…information and communication,…fire alarm.…Now we're going to scroll down 'til we find…firefighter's control and indicating panel.…Let's click open.…I'm going to come down and I'm going to put it…right on this wall right here.…Again, notice that we have three choices.…Don't place it on a face or on a work plane.…Place it on a vertical face…because it's a wall hosted device.…
Go ahead and click this wall.…Now let's hit escape.…In our coordination under 3D views,…
- Linking to architecture
- Creating views
- Adding wall and ceiling devices and control panels
- Placing a cable tray and conduit
- Adding circuitry
- Working with drawing sections
- Importing AutoCAD files
Skill Level Intermediate
Creating Concrete Buildings with Revit Structurewith Eric Wing1h 57m Intermediate
1. Project Setup
2. Incorporating Different Fire-Alarm Devices
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.