Join Eric Wing for an in-depth discussion in this video Creating view templates, part of Revit: Sprinkler Design.
- [Instructor] A lot of work goes into setting…up the views just the way you like it.…It takes a lot of time and tweaking.…Since Revit allows us to have multiple disciplines…on the same model, we need a quick way…to convert any view into the exact state…we'd like to see it.…This can be done quite easily.…The objective of this video is…to basically get rid of all the HVAC…we see in our project browser.…I want the rest of my floor plans…and ceiling plans and even my 3D plan…to show up down here under sprinkler and ceiling.…So let's get started.…
Under Projects I'm gonna go Open,…and of course I'm gonna browse…to where I'm keeping my Exercise Files,…and I'm gonna grab my 01_05_Templates, and click Open.…So these are some unconfigured mechanical HVAC…floor plans which we're going to convert…over to sprinkler plans.…Let's double-click on Level 1.…I like what we have here, but let's just check…our visibility graphics one more time.…
Type VG, don't hit Enter.…We successfully turn off all of…our Model Categories we don't wanna see,…
Author
Released
9/21/2018- Linking to architecture
- Creating views
- Configuring routing preferences and systems
- Adding sprinklers, risers, and pipes
- Tagging pipes
- Adding schedules
- Importing AutoCAD files in Revit
Skill Level Intermediate
Duration
Views
Related Courses
-
Creating Concrete Buildings with Revit Structure
with Eric Wing1h 56m Intermediate -
Building Roofs with Revit
with Eric Wing3h 11m Intermediate -
AutoCAD: Creating Sprinkler and Fire-Alarm Systems
with Eric Wing1h 41m Intermediate -
Revit: Fire-Alarm Systems Design
with Eric Wing1h 29m Intermediate
-
Introduction
-
1. Project Setup
-
Linking the architecture4m 21s
-
Creating plan views4m 26s
-
Creating view templates6m 26s
-
-
2. Routing Preferences and Systems
-
Configuring systems5m 46s
-
Adding spaces6m 36s
-
3. Laying Out Sprinklers and Pipes
-
Adding sprinklers5m 44s
-
Adding risers and mains3m 33s
-
Adding equipment3m 9s
-
Tagging pipes2m 33s
-
Adding schedules2m 39s
-
Creating a 3D riser4m 23s
-
-
4. Detailing
-
Working with sections3m 46s
-
Adding drafting views3m 30s
-
Inserting views from files2m 19s
-
-
Conclusion
-
Next steps32s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating view templates