From the course: Revit 2019: Essential Training for MEP (Imperial)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding conduit - Revit MEP Tutorial
From the course: Revit 2019: Essential Training for MEP (Imperial)
Adding conduit
- [Instructor] So, let's add some conduit. I remember the good old days when Revit didn't even have conduit, but now with each new release, Revit seems to be adding more and more to the conduit library. To get started, let's go to Projects, Open, we'll grab Electrical Project_conduit, Open. Now there's a few different ways we can model conduit, and we'll do a couple different ways. But what I want to do, is I want to zoom in on the ELECTRICAL room. Make sure that you're under Electrical Power, Floor Plan, Level 1. Now I want to cut a section through here looking straight at this electrical panel. So on your Quick Access Toolbar, click the Section button, pick a point right here and come straight up and pick a point there. You can hit Escape a couple times. Now double click on the section bubble. It's going to open our section up. I'm going to zoom in to here. I'm going to set my Detail Level to Fine. Now go ahead and select this panel. Do you see these little nodes? We can draw…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Adding receptacles2m 50s
-
(Locked)
Adding panels3m 10s
-
(Locked)
Creating spaces3m 12s
-
(Locked)
Creating a circuit3m 17s
-
(Locked)
Adding lighting fixtures4m 4s
-
(Locked)
Adding switches3m 36s
-
(Locked)
Creating a lighting circuit2m 34s
-
(Locked)
Creating a switching circuit1m 18s
-
(Locked)
Creating and labeling a wiring plan5m 45s
-
(Locked)
Adding conduit6m 40s
-
(Locked)
Creating conduit types3m 2s
-
(Locked)
Adding cable tray3m 45s
-
(Locked)
Challenge: Electrical29s
-
(Locked)
Solution: Electrical1m 40s
-
-
-
-
-
-
-