Join Paul F. Aubin for an in-depth discussion in this video Creating a new project from a template, part of Revit Architecture 2014 Essential Training.
All the work you do in Revit is contained in a single Revit Project file. There's a few different ways that we can create new projects in rev it. We can use the recent files screen or the application menu. Both of these which we've looked at in a previous movie. So I want to focus just on the new file creation areas. Here we've got new or the architectural and construction environmental Or under the big R the application menu we can go to New and then Project. Now there's not a lot of difference between which way you choose it. If I choose new project here it brings up a dialogue, new project, and it lists out for me those same two templates that we saw listed here, and if I click this new link I get the same dialogue, so it's really the same command either way...
The difference would be, if you're already in a project. Then you wouldn't see the recent file screen. So you'd want to use the application menu. Now, the differences between the architectural template and the construction template are something that I want to look at here in this movie. So if I choose the architectural template, and I click okay. And I could have gotten there with that. Short cut, again a really basic starting point. If we look at the project browser, we get a level one and level two floor plan, we have got a couple ceiling plans, and a few elevations. There are no sheets, there are no schedules, it's a really, really basic project with sort of like a no frills, just get me into the program sort of project.
But there are lots and lots of settings or lots of things that can be preconfigured. In a Project template. Now I am going to just show you a couple examples by closing this, not going to save it and oopening up some of the other templates so take a look and I will start with this construction template right here just as a point of contrast. When I open that the screen here looks pretty much the same but if you look at the project browser you can see that there are some differences. Instead of just having level one and level two floor plan, I now have some additional floor plans showing in the list.
Under 3D views I have several additional views showing in the list and if I scroll even further down I have some schedules. Quite a few actually and I have some sheets already. Now let me show how some of this works. All of those views don't really tell us very much unless there's something to view. So I'm just going to come over here and add a wall. And don't worry about the specifics right now, we'll be talking about walls and doors in a future movie. But I'm going to add a wall and a couple quick doors. And zoom in here.
And this one is door number one. You can see right there. This one is door number two. You can see it right there. And this one is door number three, you can see it right there. Now if I scroll down and look at one of these other views. Like a south elevation you can already see the wall and the three doors or perhaps this door quantity schedule what you see here is that there is a single line item listed here but it says the count is three.
So, it's recognizing that I actually have three different doors on that list. Now, if i go back to level one, and I select one of these doors, and change it to something else, gets a little smaller, scroll down, open up that same one, you'll see I now get two different line items. So, this was the construction template, and if you look at the names of the schedules, they all start with either QA or QC for quantities or quality control. So the kinds of things that a contractor might be interested in is counting stuff or verifying that everything is the way it should be but they're certainly interested in the quantities that would be in the model so that they could order the correct materials and make sure everything gets to the site. So you can see all of these schedules are pre-configured to list out that kind of information, so that they simply start drawing and these lists are already populating themselves automatically.
So this is one of the really powerful benefits of starting with a template. I'm going to close this one, and I'm not going to save it. And there are a few other templates that are provided, and I want to just show you what a couple of those look like, and to do that, I'm going to click the new link here. And go to browse this time. Construction and default are listed here. Default is actually what they're calling the architectural template, that was that really simple one that had very little in it, and construction is the one that we just looked at, but there's also a commercial and a residential default listed here as well. Now, we're going to begin a project here in the coming movies and we're going to start it with the commercial default, and let me just show you what that template. Looks like, so I'm going to choose it right there. Click OK.
And take a look, we've got some different floor plans, elevations, simpler schedules this time. You know, just a basic door schedule, basic room schedule, but this one's got a whole bunch of sheets already in here. So, here's what I'm going to do. I'm going to add a wall. (SOUND) Again, don't worry too much about the specifics. I'm going to add a door to that wall. Again, don't worry too much about those specifics. Now, if I scroll down here we would see that wall that I've just drawn from either the south or one of the other elevations like the west or the east.
Here's what it looks like from the south. Here's what it looks like from the west, okay? We're just sort of seeing it edge on I drew it at a slight angle. If I scroll down here, you'll see that there's a couple of sheets that are listed here that already are setup for elevations. A4 has the North and South elevation. A5 has the East and West elevation. I'm going to open up A4 by double clicking on it right here. And what you see is This right here is the north elevation. That's number two. This one's the south elevation.
That's number one. Here's the model. Here's the model. Now if I return to my floor plan, level one floor pan and you zoom in here. This is the rest elevation. That's number two on a five. The ones we just looked at Or this one, number one, on A4 and this one, number two on A4. Revit automatically inputs the drawing number and the drawing reference directly in the symbols for us and when you start in one of these templates that's already preconfigured this way You can basically just start drawing your model in the correct location, and you're already getting schedules that are populating themselves like the one we saw a moment ago in the construction template.
Or sheets that are showing appropriate views already. There's a lot of things that can be pre-built and put into the template to get you started. Now there's a lot of stuff that you can't put in a template automatically as well. So, in the next few movies we're going to be looking at some of the early project setup things that we would want to do like setting up levels and setting up grids and so forth, So your template can only take you so far, but it's a great place to get started and you are highly recommended to always start your projects with an appropiate template. Now many of you may actually be in a firm that has their own custom template, so rather than choosing from one of the ones I've just shown you here, which are really just examples, you might be using one that comes from your office standards that somebody there in your firm has created. Regardless of the template you start with though, all projects should really be begun with an appropriate template.
- What is BIM?
- Understanding Revit element hierarchy
- Navigating views
- Creating a new project from a template
- Refining a layout with temporary dimensions
- Adding walls, doors, and windows
- Adding plumbing fixtures and other components
- Linking AutoCAD DWG files
- Rotating and aligning Revit links
- Working with footprint and extrusion roofs
- Adding openings
- Adding railings and extensions to stairs
- Creating stacked and curtain walls
- Hiding and isolating objects
- Adding rooms
- Creating schedule views and tags
- Adding text and dimensions
- Creating new families
- Plotting and creating a PDF
Skill Level Beginner
Q: Is this course valid for all of the Revit architecture products? Are there any movies in this course that do not work in Revit LT?
A: This course is designed to work for anybody learning any of the Revit architecture products, including Autodesk Revit (available as part of the "Autodesk Building Design Suite"product), Autodesk Revit Architecture, and Autodesk Revit LT.
However, some individual movies in the course are not valid in Revit LT, due to the limited feature set of that application. Those movies are:
Chapter 3 - Accessing multi-user worksharing projects
Chapter 5 - Establishing shared coordinates
Chapter 6 - Using the shape editing tools to create a flat roof
Chapter 7 - Working with stairs