From the course: Revit Architecture: Designing a House

Unlock the full course today

Join today to access over 22,500 courses taught by industry experts or purchase this course individually.

Creating the interior walls for the main level, part 1

Creating the interior walls for the main level, part 1

From the course: Revit Architecture: Designing a House

Start my 1-month free trial

Creating the interior walls for the main level, part 1

“

- [Instructor] To draw our interior walls on the first floor, the first thing we need to do is underneath the project browser, make sure that under floor plans, we're in the first floor view. The reason is is that any wall that we draw here on the first floor view will initially be associated with that first floor level. Then, underneath the architecture tab, select on the picture of the wall. Underneath properties, here on the type selector list, make sure that interior wall dash four and a half inches is selected. If it isn't, just scroll until you can find that interior wall, four and a half inches and select it off of the list. For the base constraint, make sure the base constraint is first floor. That means the bottom of the wall will be at the first floor level. And that the base off set is zero feet to zero inches, which means the bottom of the wall won't be raised up off of that first floor level. Also make sure that the top constraint is up to the level top, which is the top…

Contents