Join Eric Wing for an in-depth discussion in this video Creating the door, part of Revit Families Workshop.
In this lesson, we're going to add the door panel to the family. …We finally get to do a simple extrusion. Okay, the perimeter will be simple, but …it'd be cool if the door was a stile and rail type door, with either a glass or …wood insert. Let's do that. …The objective of this exercise is to create the one and three eighths inch …thick door panel. Then we will be dividing some reference …plans and adding styles and rails. Open the door family and follow along. …The first thing I'd like to do is set my visual style to shaded. …You can see the door a little bit better. The next thing I want to do is go down to …my ref level, floor plans, in the project browser, and let's take a look at what …we're going to do. Better exterior, nor interior.…
The exterior is where we want the door, this reference plane is already put there …by Revit. We selected and it already has a name, exterior. …What we're going to do is go to the exterior elevation and set our reference …plain at this, when we do our extrusions. So, in the Project Browser, let's go to …
- Creating a basic profile family
- Creating a door family
- In-place massing
- Working with complex families
- Using yes/no parameters and if statements