Join Brian Myers for an in-depth discussion in this video Adding windows to the project, part of Revit Architecture: Designing a House.
- Now let's start adding windows to this project.…And let's begin by adding a window…down in the basement area.…So I'm going to zoom in here to the back wall…where we have our bedroom.…Underneath the architecture tab there is an option…here for window and if you select on window,…you'll notice that there's really only one…window that's currently loaded in and it's…a 36 by 72 double hung with trim.…Now that's plenty large enough for…what's called an egress window,…meaning that in case there's a fire or some sort of…an emergency and you're not able to get out the door,…you can then just escape out the window…in order to get out of the building.…
Now the exact location of this window,…at the moment, is still a little bit unknown.…But as best as we can let's just try to…center this window here along this space.…So once it gets to be five foot two by five foot two,…click in order to place where that window needs to be.…But one thing that I do know is that this window really…needs to be six foot off of the corner of the building.…
Author
Brian Myers
Released
11/30/2018- Entering room information
- Creating exterior and interior walls
- Creating foundation walls and footings
- Adding doors, windows, and floors
- Designing an exterior deck and front porch
- Placing columns
- Creating a roof
- Adding rooms
- Placing lights and ceilings
- Adding a door elevation legend
- Drafting and dimensioning
- Exporting dynamic renderings and presentations
- Creating standard sheets
- Printing documentation
Skill Level Intermediate
Duration
Views
-
Introduction
-
1. Setting Up a Project
-
Creating multiple levels10m 39s
-
2. Creating Walls
-
Creating exterior walls8m 4s
-
Creating foundation walls8m 35s
-
Modifying foundation walls12m 1s
-
Creating footings4m 45s
-
-
3. Doors and Windows
-
Adding doors to the project9m 40s
-
-
4. Floors, Decks, and Porches
-
Designing an exterior deck9m 26s
-
5. Column Placement
-
Adding beams8m 26s
-
6. Railings and Stairs
-
Creating deck stairs6m 42s
-
Creating deck railings5m 23s
-
Creating deck supports10m 7s
-
7. Adding Rooms
-
Adding rooms and room tags8m 52s
-
-
8. Residential Roof Design
-
Creating a gable roof8m 54s
-
Adding walls at the porch10m 13s
-
Modifying a wall profile4m 2s
-
-
9. Kitchen, Bathrooms, and Utility
-
Placing countertops9m 47s
-
Placing plumbing fixtures5m 49s
-
Creating the utility room5m 29s
-
10. Ceilings and Lights
-
Placing a normal ceiling6m 16s
-
Creating a coffered ceiling7m 57s
-
Placing ceiling lights9m 18s
-
-
11. Creating 3D Views
-
Creating an exterior camera8m 21s
-
-
12. Creating 2D Views
-
Creating section views9m 12s
-
Creating an enlarged plan3m 15s
-
-
13. Schedules and Legends
-
Creating a door schedule6m 39s
-
-
14. Notes, Text, Drafting, and Dimensions
-
Dimensioning6m 46s
-
Adding general notes4m 14s
-
Adding notes with text12m 5s
-
Creating detail views11m 6s
-
-
15. The Site
-
Site creation12m 36s
-
Adding plants7m 44s
-
-
16. Presentations and Renderings
-
Exploring dynamic renderings13m 42s
-
-
17. Sheets and CDs
-
Creating standard sheets6m 14s
-
Setting up standard sheets12m 1s
-
Printing6m 54s
-
-
Conclusion
-
Next steps35s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Adding windows to the project