Join David Bombal for an in-depth discussion in this video HPE ProCurve (Aruba) OpenFlow configuration, part of Practical Software-Defined Networking: 5 OpenFlow Physical Switches.
- [Narrator] To configure OpenFlow…on an HP Provision Switch, do the following:…Type configure, openflow.…That takes you to Global OpenFlow Configuration Mode.…Specify a controller that's going to manage the Switch.…In this case, the command controller-id 1 is specified;…the range is from 1-128.…That allows you to have multiple controllers managing…separate instances on the Switch.…Specify the IP address of the controller.…
So in this case, IP address 192.168.56.7…referenced with controller-id 1 is going to manage…instance of vlan10 on the Switch.…It's a requirement that the vlan used for communication…to the controller from the HP Provision Switch…be non-OpenFlow enabled.…So this Switch is communicating with this controller…using this interface of vlan 192 and OpenFlow is not enabled…on vlan 192; that is just a traditional…routing and switching vlan.…
In this example a single instance is configured,…instance vlan10.…Vlan10 here is just a name, so it doesn't have to match…the vlan number that the instance is associated to,…
- Configuring and working with Zodiac FX
- Blocking specific protocols
- Writing flows to Zodiac FX
- Configuring and working with Raspberry Pi
- HPE physical switches
- Physical switches with the HPE SDN Controller
Skill Level Beginner
Networking Foundations: IP Addressingwith Timothy Pintello2h 35m Intermediate
Networking Foundations: Network Media (LANs)with Greg Sowell1h 9m Intermediate
1. Zodiac FX
2. Raspberry Pi
3. HPE Physical Switches
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.