Join Michael Lehman for an in-depth discussion in this video Developing MyHomeWeather: Arduino, part of Programming the Internet of Things with iOS.
- It's time to take a look at developing MyHomeWeather.…The IOS app that works with the DFRobot Bluno board…and Bluno Accessory Shield that we showed earlier.…The first step is acquiring a DFRobot Bluno and shield.…You can do that many places on the web.…Then we have to install the Arduino software and libraries,…so that we can install the…Bluno Arduino script on the board.…So this is the wiki page here for DFRobots Bluno.…If we click here on the "Tools needed",…we'll come down here and it will have a link…right here, step two under "Step by Step"…to install the Arduino IDE, which comes from this page here.…
If you're working with a Mac, which you probably are…because you're developing IOS software, right?…You'll want to install the Mac OS X version.…Then you need to come over to the…Bluno Accessory Shield page,…and here under "Step by Step",…you'll need to go to step three…and download and open the INO file,…which is the Bluno script for interacting with Bluetooth,…and the temperature and humidity sensor,…which we're going to use,…
- Exploring the IoT universe
- Understanding sensors and effectors
- Connecting inputs and outputs
- Connecting to devices via Wi-Fi or Bluetooth
- Using Apple iBeacon
- Creating your own things with programmable hardware
- Using IFTTT to program things
- Exploring trends in IoT
Skill Level Intermediate
1. The Internet of Things (IoT)
2. Exploring Things
3. Connecting to Things
4. Using Apple iBeacon
5. Creating Things
6. Managing Your Things
7. The Future of IoT
Next steps3m 4s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.