Join Michael Lehman for an in-depth discussion in this video Creating command and control, part of Programming the Internet of Things with iOS.
- As we dig into the details of what makes a thing,…there's really four specific pieces.…Command and control, inputs, outputs and connectivity.…So, let's take a detailed look at command and control.…This is how you do a computation…where you store your information…and how you interact with the world…in terms of time.…Now, in terms of the CPU and a thing,…first of all it's going to be low power,…because almost every internet of things thing…is battery powered.…So, you're going to find out that you have 10 percent…of your desktop CPU power or maybe even way way less.…
That's because you want to run it off of battery…and if you want to run it off of battery…for weeks or months at a time,…it's got to be even smaller and smaller and smaller.…In fact, most things either use an ARM…or similar lower power processor…with a limited instruction set and, in fact,…the devices like iBeacons, they're based on the TI chips.…Actually, we have an enhanced 8051 instruction set now.…And 8051 is a processor architecture designed…in the 1970s by Intel.…
- Exploring the IoT universe
- Understanding sensors and effectors
- Connecting inputs and outputs
- Connecting to devices via Wi-Fi or Bluetooth
- Using Apple iBeacon
- Creating your own things with programmable hardware
- Using IFTTT to program things
- Exploring trends in IoT
Skill Level Intermediate
1. The Internet of Things (IoT)
2. Exploring Things
3. Connecting to Things
4. Using Apple iBeacon
5. Creating Things
6. Managing Your Things
7. The Future of IoT
Next steps3m 4s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.