Insert Paths assign hardware inputs and outputs to create an external insert loop.…These are useful when employing an outboard device that would only function as…part of a channel strip, such as a Compressor or EQ.…This is a common recording technique.…There are a few more applications that are specific to film.…Let's go to the I/O Setup for a minute and select Insert.…Let's Delete all of the Default Paths and create a new one.…Let's create a 5.1 and choose the first six channels of the interface.…
…Inserts are set up the same way as inputs and outputs.…They have multichannel paths and sub-paths.…The program assumes the number output and input.…If you are using 1-6, for instance, on your interfaces as an Insert, this means…that both 1-6 six input and 1-6 output will be used.…If you find this inconvenient, you can change the numbering in the hardware…setup, but I really recommend against it.…Be absolutely sure that that's what you want to do, because this is one of…those things that if you forget about in the heat of a session, you will get completely lost.…
Author
Released
5/25/2010- Importing and displaying video for scoring
- Setting up inputs and outputs
- Working with picture sessions and OMFs
- Importing MIDI data such as tempo and meter maps
- Matching tempo and beats to existing music
- Using Elastic Audio
- Printing guide stems from cue sessions for use in live recording
- Exploring Pull Up and Pull Down
- Multitrack recording
- Mixing tracks
- Preparing for final dubbing
Skill Level Intermediate
Duration
Views
Related Courses
-
Pro Tools: Audio for Film and Video
with Scott Hirsch5h 9m Intermediate
-
Introduction
-
Welcome55s
-
-
1. New Session Basics
-
2. Using QuickTime Video
-
Using FireWire output1m 32s
-
3. I/O Setup
-
Setting output paths3m 6s
-
Setting input paths2m 2s
-
Setting insert paths2m 9s
-
Setting bus paths1m 40s
-
4. Picture Sessions
-
Sharing picture sessions3m 44s
-
Working with OMFs2m 34s
-
Slaving picture sessions2m 46s
-
5. MIDI-Based Sessions
-
Beginning a MIDI cue4m 58s
-
Importing data3m 51s
-
-
6. MIDI Functions
-
Tempo mapping to picture6m 24s
-
Matching existing tempos8m 2s
-
Using Elastic Audio5m 44s
-
-
7. Advanced QuickTime Functions
-
Using multiple clips5m 48s
-
Bouncing QT clips4m 8s
-
-
8. Session Preparation
-
9. Advanced Session Setup
-
Locking and clocking3m 9s
-
Exploring pull up/pull down3m 35s
-
10. Multitrack Recording
-
Creating a template3m 54s
-
Creating a live mix6m 1s
-
-
11. Mixing in Pro Tools
-
Creating the mix I/O3m 58s
-
Setting signal flow6m 3s
-
Naming and printing4m 40s
-
-
12. Final Dub Preparation
-
Making a headphone bus2m 58s
-
Using pull up/pull down4m 44s
-
Conclusion
-
Goodbye10s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Setting insert paths