Join Frank D. Cook for an in-depth discussion in this video A/D converters: How sound is converted to a digital signal, part of Pro Tools 12 Essential Training: 101.
- [Instructor] Earlier we covered converting a sound wave…into an electrical signal, using a microphone.…In order to record this signal on a computer,…for use with Pro Tools, the signal must be converted again…from a continuous electrical current…into discrete digital measurements.…There are two parts to this process,…taking measurements of the incoming electrical signal…at regular intervals, and converting…those measurements into binary numbers.…These tasks are handled by the Analog to Digital Converter…inside of your audio interface.…
Let's walk through both processes.…When an electrical signal enters the audio interface,…the Analog to Digital Converter begins taking measurements…of the incoming voltage at regular intervals.…Each measurement is called a sample.…The frequency of measurements is determined…by the sample rate that the converter is using.…If enough measurements are taken,…the system will be able to recreate the waveform…by plotting the sample values over time.…Think of this like plotting coordinates on a graph,…
Author
Frank D. Cook
Updated
3/23/2017Released
1/19/2017- Getting started with Pro Tools menus, windows, and edit tools
- Creating a session
- Creating a click track
- Recording audio
- Importing audio and video
- Recording, viewing, and editing MIDI data
- Selecting and navigating within tracks
- Adding markers
- Editing clips
- Creating fade effects
- Mixing tracks and adding automation
- Backing up a session
- Bouncing a mix to disk
Skill Level Beginner
Duration
Views
Q. This course was updated on 03/23/2017. What changed?
A. Challenges and solutions were added to chapters 3–10 and three videos were updated in the first couple chapters.
-
Introduction
-
Welcome50s
-
-
1. Getting to Know Pro Tools
-
2. Getting inside Pro Tools
-
The Pro Tools file structure3m 26s
-
The Pro Tools menu structure4m 20s
-
The Pro Tools main window5m 47s
-
Overview of the edit tools3m 34s
-
Overview of the edit modes4m 30s
-
3. Creating Your First Session
-
Using the dashboard3m 19s
-
Working with tracks5m 28s
-
Playing back a session3m 39s
-
Solution: Creating a session2m 34s
-
-
4. Making Your First Audio Recording
-
Creating a click track4m 13s
-
Preparing to record4m 39s
-
Organizing after recording5m 36s
-
Challenge: Recording audio1m 32s
-
Solution: Recording audio2m 41s
-
5. Importing and Working with Media in a Session
-
Importing video4m 29s
-
Challenge: Importing media1m 31s
-
Solution: Importing media3m 51s
-
6. Making Your First MIDI Recording
-
MIDI in Pro Tools4m 48s
-
Using virtual instruments4m 44s
-
-
7. Selecting and Navigating
-
Working with markers3m 8s
-
Challenge: Adding markers1m 29s
-
Solution: Adding markers1m 53s
-
8. Basic Editing Techniques
-
Editing on the grid7m 34s
-
Editing clips4m 38s
-
Creating fade effects3m 11s
-
Undoing a mistake2m 20s
-
Challenge: Editing audio1m 25s
-
Solution: Editing audio4m 44s
-
Challenge: Arranging media3m 15s
-
Solution: Arranging media6m 19s
-
-
9. Basic Mixing Techniques
-
Basic automation5m 20s
-
Challenge: Using effects1m 50s
-
Solution: Using effects5m 29s
-
10. Finishing Your Work
-
Backing up your session3m 36s
-
Bouncing your mix to disk2m 43s
-
-
Conclusion
-
Next steps1m 12s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: A/D converters: How sound is converted to a digital signal