Covers five of the most important new features in Photoshop CS5.
- View Offline
- Hi, I'm Deke McClelland, I'm here to introduce you the best new features in Adobe Photoshop CS5. And rather than merely show you how each new feature works, I'll put it through it's paces so you can see if it's any good. Plus you'll have a sense for how to use the feature to augment your own artwork and photographs. I'm gonna start things off with a collection of what I'm calling "Common Sense Enhancements." For example, there's now a Straighten button that makes an image upright and crops it in one click. For those of you who've been using Photoshop for any amount of time, these are the small tweaks and fixes that are most likely to leave you gasping and saying "Finally." It's all in response to direct customer feedback, and every enhancement is more welcome than I can say.
So these are the little things. In later videos, we'll see the big ones. Sometimes a lot of little features adds up to a great big one, and that is certainly the case inside of Photoshop CS5, particularly if you are an experienced user. You are gonna fall in love with these little features. Currently I'm looking at an image from the Fotolia image library about which you can learn more at fotolia.com/deke. And this image needs a little bit of straightening. So you may be familiar with the technique where you click and hold on the Eye-dropper tool, you choose the Ruler tool from the fly-out menu, you drag along the horizon line using the ruler, and then you go ahead and choose this command called Arbitrary.
Well it takes a little while to fish around for that Arbitrary command. It's so much easier that now inside of Photoshop CS5 you have a Straighten button. And all you do is click on that button up there in the Options bar, and Photoshop not only straightens the image, it also automatically crops it. If you don't like the crop, you wanna perform your own, then you press Control Z or Command Z on the Mac to undo just the crop and leave the image straightened. You can also merely straighten an image by Alt clicking or Option clicking on that straighten button.
I'm now gonna go ahead and define a crop boundary using the Crop tool. I'll drag around this area like so. And notice after I get done drawing a crop boundary, I automatically see the Rule of Thirds, so I can see how my image is divided up. Very useful for compositing and framing purposes. I'll go ahead and drag this edge down a little bit. That's gonna leave a wedge of white over here on the right hand side when I get done applying the crop boundary. Fortunately Photoshop CS5 ships with this thing called Content Aware Fill.
I'm gonna go ahead and grab my Lasso tool and drag around this wedge over here on the right hand side. Notice I'm not trying to be careful about my selection. Now I'll press the Backspace key, or the Delete key on the Mac. And because I'm working on the background layer, that automatically brings up the Fill dialogue box set by default to Content Aware, which means Photoshop will look at the area outside the selection and integrate it into the selection. I'll go ahead and click the OK button and Photoshop goes ahead and fills that selection automatically. I'll press Control D, Command D on the Mac, and you can see that it's a seamless fill.
It's very similar to the kind of effects you'd achieve using the Healing brush, but much easier to apply. Here's a creative example of Content Aware Fill. I've gone ahead and selected the area outside of this butterfly, and as soon as I apply Content Aware Fill, I end up getting this effect right there. So in other words, Photoshop has taken the information inside the butterfly and used it to fill the area outside the butterfly. I think you're gonna have an absolute blast using this feature. Let's look at a few other changes. I'm gonna switch to this layered composition here, and say at this point that I wanna take these three layers of Martini glasses and I wanna reduce the opacity of each one of those layers to 50%.
In the old days I would have to apply the opacity value to each layer independently. Now I can go ahead and click on one layer, Shift click on another to select all three. And then change that opacity value either manually or since I have a selection tool active right now, I can just press the five key to reduce the opacity of all three layers to 50%. If you spend a lot of time working with layer effects you're going to appreciate the fact that you can adjust the default setting for each and every one of the ten main layer effects.
Let me show you how that works. Say that I wanna go ahead and create a stroke around this text right there. Then I might grab the Rectangle tool, and draw a rectangle around that text. Doesn't matter what the fill color is, although I do need to pop it to the top of the stacks, so I'll go ahead and move it up here. And I'll rename this "Stroke" because I wanna use this rectangle in order to house a stroke effect. Then I'll reduce the fill opacity to 0%, pretty standard way of working, so that you're seeing through the layer but you'll keep the layer effect as you'll see in just a moment.
I'm gonna go ahead and turn off the Vector Mask, and then I will switch down here to the FX icon and choose the Stroke option. Now by default you apply a three point black stroke when you're first using the software. I'm presently creating a web graphic, and I'm creating the graphic at four times the size it will ultimately appear, so I wanna use a four pixel stroke, and I want the color of that stroke not to be black, but rather to be white. And this is the kind of stroke that I create on a regular basis, so you know what? Rather than having to enter these settings over and over again every time I enter this dialogue box, I'm gonna click on Make Default, and those will now be my default settings for this stroke effect from now on.
All right, now I'll go ahead and click OK to accept that new stroke. Photoshop also offers the option of pasting in place by which I mean this: I'll go ahead and switch over to this alternate view of these Martini glasses. And say that I wanna copy and paste the magenta glass into the previous composition. Why then I'll Control click or Command click on that glass two layer right there to define a selection outline, then I'll go up to the Edit menu and I'll choose the Copy command, or press Control C, Command C on the Mac.
Now I'll switch back to my previous composition. I wanna go ahead and paste that glass right into place, but if I go up to the Edit menu, and choose the Paste command, or press Control V, Command V on a Mac, it comes in at absolutely the wrong location. All right, so I'll go ahead and undo that paste, and move down the stack, click on glass 2 because that's the layer in front of which I wanna paste the magenta glass. Then I'll go up to the edit menu and choose a new command under Paste Special we have Paste in Place, which also has a keyboard shortcut of Control Shift V or Command Shift V on the Mac.
And that goes ahead and nails that glass right into place as you can see here. I can change the Blend mode to Screen, and then turn off the previous glass two layer in order to integrate that magenta glass into my composition. Those of you who spend a lot of time using adjustment layers will really appreciate this next one. I'm gonna switch over to this image, and notice that it has a Levels Adjustment layer applied to it, but I still need to make some more modifications. So I'll go ahead and double click on this Adjustment Layer to bring up the Adjustments panel, and here's something new.
By default, you can set up the Adjustments panel so that you auto select a parameter. And what that means by the way is you're gonna automatically select the first numerical value every time you bring up this Adjustments panel which is great because then it means you can go ahead and modify that first value, tab to the next value, modify it as well, and burn your way through your adjustments rather than spending a ton of time clicking around inside of this panel. This is basically a fix for something that kind of went wrong inside of CS4 that used to work better inside of CS3, and by the way, I'll go ahead and press the Enter key in order to accept that value right there.
If at any time you wanna once again select the first numerical option inside the Adjustments panel, however, you're not switching focus to it, so Photoshop doesn't have any reason to automatically do it for you, you can press a very simple keyboard shortcut, Shift Enter, or Shift Return on a Mac will go ahead and select that first value, then of course pressing the Enter or Return key will send you back out of that value and return focus to other settings inside Photoshop. A couple of other features that I think you'll really love: We have this new Mini Bridge which runs directly inside of Photoshop and allows you to browse your files on disk without having to switch to the Big Bridge application.
Plus you can take advantage of things like clicking on an image and pressing the Spacebar in order to preview that image at full screen just like you do in a bridge. When you escape out however, you'll return right back to Photoshop. And here's something else worth noting: Whether you're working inside the Mini Bridge right here, which I'm gonna close for just a moment, or whether you're working with the folder at the desktop level, and I'll go ahead and switch to a folder of images right here, that's that same folder of images from Felix Mizioznikov that we saw inside the Mini Bridge.
Notice that you can go ahead and drag and drop files from either the desktop or the Mini Bridge into Photoshop in order to create a multi-layered composition. So in this case, because I'm dragging and dropping five different images, I will have the opportunity to go ahead and accept the introduction of five images into my layered composition. And there they are. They all look a little overly saturated, because I have this Vibrance Adjustment layer sitting on top of them. But talk about convenience. Look at all these new layers placed sequentially into Photoshop and each and every one of them by default comes in as a Smart Object.
And now for what might be the biggest timesaver of them all. If you spend a lot of time working in multiple windows inside of Photoshop and at the end of a project, you wanna close all the windows, get it over with, for years we've been able to go to the File menu and choose the Close All command, or press Control Alt W, Command Option W on the Mac. However you had to confirm whether you wanted to save your changes or not for every single one of your open images. Now notice this: Apply to all. Then if you wanna save your changes, you click yes, if you don't wanna save your changes, you click no.
In either case, you click the button once and you're done. And those are what I call the small but considerable commonsense features new to Photoshop CS5.
- Making sense of enhancements
- Applying HDR Pro adjustments and effects
- Refining masks
- Using the Puppet Warp tool
- Painting a photograph