- [Narrator] In order for a skateboard…to turn there's these bushings you…can see here,…and here…which allow us to flex this truck…assembly so the skateboard can lean…right or left and actually turn the board.…Now, I need to create,…actually, three parts there.…So, I have the lower bushing,…I have the upper bushing,…and I have a washer that's tying…the whole thing together with a nut…on top of that, and the kingpin…going through everything.…Now, I could create each one of those…pieces as an individual part but…I can also do them all at the same time.…
Click over here, on the bushings part…and you can see exactly how I did it.…Now, it's one simple sketch with…one simple revolve, but it creates…three individual parts.…Really handy.…So, go ahead and click on sketch number 1.…Double click on it, and let's go ahead…and look at that front plane,…and zoom in a little bit so we…can see what's going on here.…Alright. So, what I did was create…a .65 bushing at the bottom…and I've just kind of related all these things…together using some construction geometry, here.…
- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
1. Introduction to Onshape
2. Basic Part Modeling
3. Modeling Parts
4. Part and Assembly Drawings
Next steps1m 12s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.