- [Instructor] Now the next thing we need to do…in this design is to create the king pin.…And before we can create the king pin,…we need to create a hole for where we're going to place it.…So over here on this surface,…I'd like to create a revolved cut…to put a hole through this part…so I can then build the king pin that will go through it.…So I'm gonna choose this Right plane here,…which goes directly through the part,…you can see there, in the middle,…and I'm gonna start a Sketch directly on that,…and I'm gonna click on the Right plane…so I'm looking directly at it,…and then I'm gonna go over here and look…at Sketch number one which is our original Sketch,…and I'm gonna make sure we show that…so we can kinda leverage some of that information.…
Now I'm gonna click on this line here…and that line there…and I'm gonna convert those over into this Sketch.…So click on that one and I'm gonna say Use.…There it is.…And then, now that line and that line,…I wanna make them both Construction geometry.…Great.…Now, let's go ahead and start creating our shape.…
- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
1. Introduction to Onshape
2. Basic Part Modeling
3. Modeling Parts
4. Part and Assembly Drawings
Next steps1m 12s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.