- [Instructor] If you're not already in a part studio…go ahead and click and create a new document.…Open up a blank document here,…I'm gonna go ahead and choose the front plane,…and I'm gonna go ahead and click on start a sketch,…there it is.…Now I'm in the sketch environment,…I'm gonna go ahead and click on sketch one.…Click on the front so I'm looking straight at it…and then I'm gonna go ahead and hide these other planes.…So I'm gonna just turn these off,…just 'cause I don't wanna see them,…I wanna nice clear, clean environment to be working on.…Alright, so my very first tool is gonna be the line tool.…
Click on the line tool, notice it turns into that.…Notice it highlights the little icon up there…and now I'm in the line tool.…So the first thing I wanna do is click once…and just move my cursor around…and notice what happens.…I've got this little heads up display…telling me how long the line is.…Now that's really just a helper,…you don't have to be very exact with it.…If you wanted a three inch long line,…you might want something,…
- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
1. Introduction to Onshape
2. Basic Part Modeling
3. Modeling Parts
4. Part and Assembly Drawings
Next steps1m 12s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.