Join Lazaro Diaz for an in-depth discussion in this video Understanding dynamic routing, part of Advanced Cisco Routing: RIPv2, EIGRP, and OSPF.
- All right, we have our infrastructure set up,…we chose to use routing protocol RIP.…But we do have our static routes, so what…I'm gonna do is I'm gonna open up Router 1,…and let's move it over here, we'll set up our little window.…So we can take a look at what we have.…Let's get rid of this gibberish,…Show, start.…And what we can see is, we have our interfaces all complete,…here's our RIP, as you can see it has…the classful boundaries, for each class of address.…
But we also have the static routes,…and that's one thing we need to talk about.…We need to talk about one, the process of routing,…and two, the dynamic routing process,…or the static routes.…Which one should we use?…So let's talk about that.…Well, we can keep this up here, it's not a big deal.…What happens in the routing process is the following.…When PC 1 wants to send,…let's say, PC 2 a ping,…we all know that's an ICMP request and reply.…
When it's the very first time, what happens is…PC 1 sends an ARP request…to the gateway of Router 1,…which is the F00.…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.