Join Lazaro Diaz for an in-depth discussion in this video Understanding RIPng, part of Advanced Topics in Cisco Routing: RIPv2, EIGRP, and OSPF.
- All right, as you can see,…I've added IPv6 addresses on the work area.…Because right now we're going to go ahead…and configure the iPv6 of RIP, which is RIPng,…and ng stands for "next generation".…So, we're going to go ahead and start with router one.…Going to click on that,…and let's set up our table right here,…because IPv6 addresses are not the easiest to remember,…so we need to make sure that we can see them.…So copy-paste will be your best friend…when doing IPv6.…
You're going to enable, en for short, config t.…Now, when doing IPv6, one of the most important things…that you must do is type…ipv6 unicast-routing, ipv6,…unicast,…hyphen routing.…If you do not type this command,…no IPv6 routing will work,…nothing with IPv6 will work.…So either one of the first commands you should type.…If you forget to type it,…the router will let you know…and then you need to go ahead back and do this.…
All right, so now let's going into our first interface…in router one, which is the fast ethernet zero zero,…so int f0/0,…and we're going to hit enter,…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.