Join Lazaro Diaz for an in-depth discussion in this video Understanding EIGRP, part of Advanced Cisco Routing: RIPv2, EIGRP, and OSPF.
- All right, as you can see, we have here…a brand new topology.…I'll show you the configurations of EIGRP…'cause remember EIGRP is for a medium size…to large enterprise networks.…The only thing with EIGRP, that it's Cisco proprietary…meaning you can only use it on Cisco routers.…and that's not a bad thing.…It's just that you're limited to those particular routers.…Even though EIGRP is a great routing protocol,…and why is that?…All right, so I'm going to go ahead and click…on Router 1 all the way over here on the left.…
It's labeled at zero.…So we're going to go ahead and open that up,…and let's fix our little box right here…so we can see the information.…Just move this up a little bit more, right here.…And let's do a Control-C to start fresh,…and we'll do a "sh start".…Basically, you put the IP address…just like you would on any router,…turn on the interfaces, but here's EIGRP.…This is how you would configure, and we will,…but it's basically the same thing.…The only difference, well, one of the main differences…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.