Join Lazaro Diaz for an in-depth discussion in this video Setting up the network lab, part of Advanced Cisco Routing: RIPv2, EIGRP, and OSPF.
- All right, blank Packet Tracer, no routers.…We're gonna set up our Network Lab from scratch.…So we're gonna go ahead and select our routers first.…So I'm gonna use an 1841 router.…I'm gonna click and drag it out,…but you saw that little jump?…That's cause we're kinda zoomed in.…I'm gonna zoom out just a little bit,…so it doesn't jump routers all over the place.…I'm gonna go ahead and select another router.…You see how it does that little jump.…Yeah, Packet Tracer's a little crazy, but that's okay.…
We got our routers, and we'll be renaming our routers.…We're gonna select now, the switch in our Connections area.…All right, we're gonna use a 2960 switch, click and drag.…We'll put em right underneath, and we'll…re-adjust after it's out there.…You see how it's jumping em around,…so we gotta make sure that…it doesn't fly off the screen from us…cause it will do that, and then let's move this up…and then we'll select from our connection types,…three PCs, very simple, as a matter of fact…we'll select two PCs, and we're gonna select…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.