Join Lazaro Diaz for an in-depth discussion in this video Further exploring OSPF configuration, part of Advanced Topics in Cisco Routing: RIPv2, EIGRP, and OSPF.
- Okay so we're going to configure OSPF now.…Now you've seen a quick OSPF configuration.…But now in this topology we're going to go ahead…and configure OSPF and get into a little bit deeper…areas of OSPF.…And how it creates its neighbor relationships.…So we're going to go to the first router on the left…which is labeled router five.…And we'll fix our window so we can see all the information.…Let's hit enter a couple of times.…We're going to enable.…We got to go into global, configuration.…
And then we start our OSPF configuration.…So we go to router, OSPF, and again…the process ID number we have…from 1 to 65,535.…We're going to use just one.…It doesn't really matter, it's local.…And then the network.…Network…192.168.1.0.…The wild card mask is a 24 mask.…So we got 0.0.255.…And then the area so we can share the same routing tables.…
Area 0 remember is your backbone area.…That's the first area you would create…in a real world scenario.…The next one would be network.…And I just want to verify.…Let me move this out of the way real quick.…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.