In this video, Todd Lammle shows you in detail how to finish the static routing on the stub routers SF and LA, as well as how to verify and troubleshoot static routing issues. After static routing is completely working in the internetwork, Todd demonstrates configuration of a Cisco device(s); he deletes the static routes off the SF stub router and configures default routing for that stub network.
- [Instructor] Alright now let's go out…and finish the configurations for San Francisco and LA.…And San Francisco can get to Corp and Corp to San Francisco,…and Corp is configured for the routes behind LA.…But I need to configure LA to San Francisco.…I also need to put in the WAN links…or San Francisco won't be able to get to LA and vice versa.…So let's go ahead and take a look.…I'm in the Corp router.…I'm all configured here with all of the networks.…We can see all the serials, my LAN and all the remote LANs.…So let's run out to San Francisco…and configure it for the LA router, to get to LA.…
So show IP route.…We can see we can get to the 10 network…and the directly connected 10 and 40,…I want to get to 192.168.20…and 192.168.30.…So to get to…192.168.20 and 30,…you have to do them one at a time, remote mask.…And I can use my exit interface…or my next hop, which is 172.16.10.1.…I'm gonna say serial zero one one.…Oops, I need a space there.…And then take 20 and then to 30.…
And I can't send it to LA.…I have to send it to Corporate,…
For more information on the CCENT exam, visit Cisco's website.
- Overview of internetworking
- The TCP/IP networking model
- Easy subnetting
- Managing Cisco IOS
- Managing Cisco networks and devices
- IP routing
- Layer 2 switching
- VLANs and InterVLAN routing
- Network address translation
Skill Level Intermediate
Internetworking devices4m 20s
3. Introduction to TCP/IP
4. Easy Subnetting
5. VLSM, Summarization, and Troubleshooting TCP/IP
6. Cisco Internetworking Operating System (IOS)
7. Managing a Cisco Internetwork
8. IP Routing
9. Layer 2 Switching
10. VLANs and InterVLAN Routing (IVR)
12. Network Address Translation (NAT)
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.