In this video, Todd Lammle shows you how to configure RIPv1, and then how to enable RIPv2 on your Cisco routers. By using the version 2 command, along with the no auto-summary command under the RIP process, Todd configures RIPv2 throughout his internetwork. He finishes this section by using and configuring the pass-interface command, as well as explaining the passive-interface default command.
- [Narrator] Now that we have our…fundamentals down for dynamic…routing, RIP routing, we know…we don't type in remote networks…like we did with static…we type in our directly connected networks,…the completely opposite way to configure it.…So looking at our network drawing here,…really not even that important cause routing…is all about me, all about the router I'm on.…So let's run out, we're gonna configure RIP…I've already removed the static and default routing…that we used so we have no routing whatsoever…let's go ahead and get RIP version two…up and running real quick on our…little internetwork.…
Logging into the corp router and show ip route…just to you really quick,…Always verify your routing table…now I have just directly connected networks.…Now, the nice thing about this, if I do…show ip route connected, now this shows you…only my directly connected routes and my links…or show ip int brief as you guys know,…and now I see my network so basically…if I look at this it says this is what…you want to type in under your routing protocol.…
For more information on the CCENT exam, visit Cisco's website.
- Overview of internetworking
- The TCP/IP networking model
- Easy subnetting
- Managing Cisco IOS
- Managing Cisco networks and devices
- IP routing
- Layer 2 switching
- VLANs and InterVLAN routing
- Network address translation
Skill Level Intermediate
Internetworking devices4m 20s
3. Introduction to TCP/IP
4. Easy Subnetting
5. VLSM, Summarization, and Troubleshooting TCP/IP
6. Cisco Internetworking Operating System (IOS)
7. Managing a Cisco Internetwork
8. IP Routing
9. Layer 2 Switching
10. VLANs and InterVLAN Routing (IVR)
12. Network Address Translation (NAT)
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.