In this video, Todd Lammle shows you how to look at a routing table, understand the various codes, and how to find your directly connected links as well as your local interface IP addresses in the routing table. In this section, we'll turn off dynamic routing and prepare our internetwork for static routing
- [Instructor] Alright, let's run over to the corp router,…and let's prepare our internet work to configure ip routing.…So, I know that doesn't make sense,…so lets take a look at it.…So, the first thing is that we understand…that a router was called forwarders at first, right?…And so by looking at the map of the internet work,…with the show ip route command,…show ip route, we can see the path the packet will take,…or that ip will use to get to a remote network.…So, by looking at this routing table,…we'll see the seize, stand for directly connected,…and the codes are up above, right?…And I can even scroll up a little bit here,…and we see l is local and c is connected.…
Now, l means this is the ip address on my local interface.…C stands for connected, s is for static and r is for RIP.…There's some other ones we'll talk about when we get into…icnd two such as osp ah-vee-a-jayr-a-pee-an-so-um.…So, we can see going down now to our map,…see 10.10.10.0/24 is directly connected…off of fast ethernet zero zero.…In the link address, the fast ethernet zero zero,…
For more information on the CCENT exam, visit Cisco's website.
- Overview of internetworking
- The TCP/IP networking model
- Easy subnetting
- Managing Cisco IOS
- Managing Cisco networks and devices
- IP routing
- Layer 2 switching
- VLANs and InterVLAN routing
- Network address translation
Skill Level Intermediate
Internetworking devices4m 20s
3. Introduction to TCP/IP
4. Easy Subnetting
5. VLSM, Summarization, and Troubleshooting TCP/IP
6. Cisco Internetworking Operating System (IOS)
7. Managing a Cisco Internetwork
8. IP Routing
9. Layer 2 Switching
10. VLANs and InterVLAN Routing (IVR)
12. Network Address Translation (NAT)
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.