Join Lazaro Diaz for an in-depth discussion in this video Comparing RIPng and RIPv2, part of Advanced Cisco Routing: RIPv2, EIGRP, and OSPF.
- All right, so now we've configured…both routing protocols; RIP Version 2, and RIPng.…So what's the difference?…Let's take a look at Router 1.…Let's open that up, and let's take a look at…the routing table for Rip Version 2.…"sh ip route".…As you can see, it looks pretty much the same…as the other one except these are…dotted decimal addresses,…normal numbers that we understand.…But if you look at the "sh ipv6 route",…you see now we're looking at hexadecimal.…
Even though you want to say that these are decimals,…they're not, they're hexadecimal numbers.…But the administrative distance of RIP 120…is still the same on that one,…than it would be on Rip Version 2.…No different.…It still uses hop counts,…as you can see here.…This particular network is two hops away.…This one's three hops away,…and this one will tell you this is one hop away,…two hops away.…So the biggest difference between Rip Version 2 and RIPng,…is definitely one's in decimal format,…the other one is in hexadecimal format.…
But in the background when these routers are sending…
- Configuring static and default routes
- Understanding dynamic routing
- Issuing verification commands
- Comparing RIPng and RIPv2
- Using RIP timers
- Configuring an EIGRP feasible successor route
- Exploring EIGRP options
- Introducing the OSPF process ID
- Exploring wildcard masking
Skill Level Advanced
1. Configuring Routing on a Cisco Router
2. The Routing Information Protocol (RIP)
3. The Enhanced Interior Gateway Routing Protocol (EIGRP)
4. The Open Shortest Path First (OSPF) Routing Protocol
Wrapping up3m 5s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.