See an overview of some of the chapters dimensioning commands in a real-world drawing.
- [Instructor] This exercise will demonstrate how to…use the previously discussed dimension commands…in a simple practice drawing.…Continue using the file for chapter 3,…Working with Dimensions.dgn.…And using view groups, select the practice model.…Next, let's place a linear dimension string…across the front of the building so that I can show you…how to modify dimensions if they aren't placed…in exactly the right location.…Select the dimension linear command…and verify that the method is set to linear stacked…and that the alignment is set a true.…
Define two points at the front of the building…starting on the left side…and drag the dimension to a good location…and left click to accept.…While still in the command, snap to the next point…across the front of the building…and finally, the last point…across the front of the building.…The second extension line doesn't show the gap correctly.…So, select the modify command and modify the lower extension…point to the front point on the building.…Now the gap is displayed as needed.…
Author
Released
3/9/2018- Placing, points, curves, and line streams
- Editing text
- Working with dimensions
- Element attributes
- Changing the display and scales of various linestyle types
- Working with groups
- Modifying and manipulating fences
- Using measure commands
- Working with cells
Skill Level Advanced
Duration
Views
Related Courses
-
Learning Bentley MicroStation V8i
with Jeanne Aarhus3h 11m Intermediate -
MicroStation: Plotting in V8i
with Jeanne Aarhus1h 53m Intermediate -
MicroStation 3D Essential Training
with David Martin3h 37m Beginner
-
Introduction
-
Welcome2m 51s
-
Using the exercise files2m 23s
-
-
1. More Draw Commands
-
Place points5m 8s
-
Place lines at active angles3m 38s
-
-
2. Working with Text
-
Place and edit text7m 29s
-
Miscellaneous text commands4m 18s
-
Using enter data fields6m 55s
-
Label coordinates2m 39s
-
-
3. Working with Dimensions
-
Dimension elements6m 30s
-
Linear dimensions4m 26s
-
Ordinate dimensions3m 48s
-
Practice3m 25s
-
-
4. Working with Element Attributes
-
Element attributes6m 58s
-
Change attributes5m 57s
-
Linestyle attributes7m 19s
-
-
5. Working with Groups
-
Move to contact2m 43s
-
Drop element3m 33s
-
Create complex chain2m 57s
-
Create complex shape2m 11s
-
Create region7m 12s
-
Create graphic group4m 1s
-
Group hole3m 12s
-
-
6. Using Fences
-
Place fence6m 22s
-
Drop fence3m 10s
-
Copy fence to new file3m 10s
-
-
7. Using Measure Commands
-
Measure distance4m 15s
-
Additional measure commands4m 20s
-
-
8. Working with Cells
-
Using cells5m 10s
-
Different cell types5m 53s
-
Cell index2m 55s
-
Creating cells7m 40s
-
Using AutoCAD blocks3m 26s
-
Using cell selector3m 34s
-
-
Conclusion
-
Next steps1m 40s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Practice