Project #3 is started based on the settings from Project #2. An overview of the project is covered using the PDF version of the project. The base profile for the project is created and extruded.
- [Instructor] This is the first video…for the angle guide project,…so we're going to start by drawing the base.…I've already opened up the project to complete file,…so let's go ahead and save this one more time,…and then I'll do a Save As, and we're going to…save this in our Next Chapter folder,…so we're going to save this in Chapter Four,…and I'm going to call this one Project #3,…and then 04, and then underscore 01.…
Okay, so just like we did when we started…Project #2, we started with the previous project…and we're going to use this now,…this Project #2 drawing as our setup…for Project #3 so I can go ahead and…safely delete the solid, so I'll just…select the whole thing and hit delete.…And then over here, in my B size border view,…I can go ahead and delete the dimensioning.…Let me just go through and delete all…the dimensioning and the extra view that I had,…and I'm going to leave the isometric view…text off to the side here.…
And then I'll go ahead and detach…these views and then we'll bring them in…when we finish the three-dimensional…
- Navigating the interface efficiently
- Creating 2D views from 3D solid geometry
- Creating a complex shape
- Creating dimension styles
- Creating a 2D view with title blocks
- Dimensioning and printing a drawing
- Beginning the 3D solid
- Drawing and dimensioning a plate, bracket, and more
Skill Level Beginner
1. Introduction to the Software and Projects
2. Drawing and Dimensioning a Plate
3. Drawing and Dimensioning a Bracket
4. Drawing and Dimensioning an Angle Guide
5. Drawing and Dimensioning a Geneva Cam Assembly
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.