From the course: Photogrammetry for Product Design and AEC
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
How to set mesh editing goals
From the course: Photogrammetry for Product Design and AEC
How to set mesh editing goals
- [Instructor] In this video, we'll talk about how to set goals for editing a mesh after going through a photogrammetry workflow. In order to do so, we'll need to consider a few deciding factors. Most importantly, what is the mesh for? Are we going to be 3D printing something, are we going to use it just on screen for visualization, are we extracting measurements to build some sort of a CAD model? But we should know those questions before we go ahead and start editing. Next, what editing software is available? There are lots of mesh editing packages out there, and each one kind of has its own specialty. So it's important to know which ones we have available to us, or which ones we might need to get. On a related note, thinking about what are the capabilities of the software that we have available to us. Do those match up with the purpose that our mesh is for? Last but not least, how much time is available for editing?…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
- sample_set_00_calibration.zip
- sample_set_01_bird.zip
- sample_set_02_stillLife_part_1.zip
- sample_set_02_stillLife_part_2.zip
- sample_set_02_stillLife_part_3.zip
- sample_set_02_stillLife_part_4.zip
- sample_set_03_stillLife_video.zip
- sample_set_04_statue_part_1.zip
- sample_set_04_statue_part_2.zip
- sample_set_04_statue_part_3.zip
- sample_set_04_statue_part_4.zip
- sample_set_04_statue_part_5.zip
- sample_set_04_statue_part_6.zip
- sample_set_04_statue_part_7.zip
- sample_set_04_statue_part_8.zip
- sample_set_04_statue_part_9.zip
- sample_set_04_statue_part_10.zip
- sample_set_04_statue_part_11.zip
- sample_set_04_statue_part_12.zip
- sample_set_04_statue_part_13.zip
- sample_set_04_statue_part_14.zip
- sample_set_05_mesh_edit.zip
Contents
-
-
-
-
-
-
(Locked)
How to set mesh editing goals3m 14s
-
(Locked)
Importing a mesh into Metashape for editing1m 50s
-
(Locked)
Analyzing and repairing mesh topology in Metashape2m 50s
-
(Locked)
Automatically removing isolated mesh fragments in Metashape3m 15s
-
(Locked)
Manually selecting mesh faces in Metashape4m 53s
-
(Locked)
Closing mesh holes in Metashape3m 44s
-
(Locked)
Smoothing a mesh in Metashape2m 6s
-
(Locked)
Decimating a mesh in Metashape3m 21s
-
(Locked)
Exporting a photogrammetry model for 3D printing1m 51s
-
(Locked)
-