From the course: Meshmixer Essential Training
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Fixing difficult 3D scan problems: Starting off - Meshmixer Tutorial
From the course: Meshmixer Essential Training
Fixing difficult 3D scan problems: Starting off
- [Instructor] This video is on how to do a little bit more advanced troubleshooting of 3D scans. So this is a scan of a piece of bamboo, a plant in my office, and it got a lot of my office and, obviously, the thing that I was photographing, the bamboo. So just like in the other video, we're going to start off by doing some plane cuts across. If you get the wrong one, you hit this little arrow to flip it. Just to kind of whittle down the selection to be something a little bit more manageable. You certainly could just select the plant in the center and then invert it, but I like doing this because I just like to kind of get a 3D feel of what my object is. And where it is in space. So with just four plane cuts here, I have a pretty good isolation of this bamboo. So I'm going to zoom in here. And I'm going to go into analysis to inspector to see if there's anything wrong I didn't know. So there are some issues. We have an open boundary here, so that's fine, we can fix that later on. We…
Contents
-
-
-
-
-
-
-
-
Introduction to the fun of 3D scanning1m 33s
-
Things to look for when first loading up your 3D scan5m 59s
-
Is your scan printable?2m 42s
-
Fixing easy printability problems4m 31s
-
Fixing difficult 3D scan problems: Starting off17m
-
Fixing difficult 3D scan problems: Starting with cleanup2m 6s
-
Fixing difficult 3D scan problems: Hole filling6m 40s
-
Fixing difficult 3D scan problems: Thickening4m 13s
-
Final steps for printability3m 26s
-
Service bureaus for color printing4m 59s
-
-