Join Gabriel Corbett for an in-depth discussion in this video Putting it all together, part of Learning Onshape.
- [Narrator] In this movie, we're going to be putting…everything together to create our final assembly,…which is the skateboard you see in front of you.…So to do that, let's go ahead and start…a brand new assembly, so over here, I'm gonna say,…"create assembly."…The first item I wanna bring in is the skateboard deck,…so I'm gonna go over to insert, click on insert,…and choose the parts.…Soon as it loads, let's go ahead and scroll…some of that up, or scroll down to go find the deck,…and there it is.…So click on that, load it in, and click on okay.…
Now I wanna bring in two of the skateboard truck.…So click on insert, let's go to assemblies,…choose the truck assembly,…choose one more,…and then go ahead and click on the green check mark…to acknowledge that.…Alright, I wanna take these and I wanna spin them around,…so the first thing we wanna do there…is right click on it, or click on the assembly itself…and spin it around.…
Perfect, same thing over here.…Let's take that one and let's spin it.…And notice things are kind of still flexing a little bit.…
Author
Released
9/16/2016- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
Duration
Views
Related Courses
-
Learning Autodesk Fusion 360
with Taylor Hokanson1h 41m Appropriate for all -
Learning SOLIDWORKS
with Gabriel Corbett1h 59m Beginner
-
Introduction
-
Welcome1m 52s
-
Using the exercise files1m 37s
-
Hardware and software1m 22s
-
-
1. Introduction to Onshape
-
Navigating Part Studios5m 50s
-
Skateboard project overview2m 43s
-
2. Basic Part Modeling
-
Creating sketches6m 39s
-
Using the extrude feature7m 52s
-
Creating holes3m 45s
-
-
3. Modeling Parts
-
Making the wheel8m 14s
-
Building the base plate10m 2s
-
Designing the king pin6m 49s
-
Designing the hanger4m 34s
-
Making the bushings2m 4s
-
Creating the truck assembly5m 10s
-
Design the deck2m 28s
-
Putting it all together3m 3s
-
-
4. Part and Assembly Drawings
-
Part drawings13m 16s
-
Assembly drawings5m 17s
-
-
Conclusion
-
Next steps1m 12s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Putting it all together