From the course: Learning Onshape
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making the bushings - Onshape Tutorial
From the course: Learning Onshape
Making the bushings
- [Narrator] In order for a skateboard to turn there's these bushings you can see here, and here which allow us to flex this truck assembly so the skateboard can lean right or left and actually turn the board. Now, I need to create, actually, three parts there. So, I have the lower bushing, I have the upper bushing, and I have a washer that's tying the whole thing together with a nut on top of that, and the kingpin going through everything. Now, I could create each one of those pieces as an individual part but I can also do them all at the same time. Click over here, on the bushings part and you can see exactly how I did it. Now, it's one simple sketch with one simple revolve, but it creates three individual parts. Really handy. So, go ahead and click on sketch number 1. Double click on it, and let's go ahead and look at that front plane, and zoom in a little bit so we can see what's going on here. Alright. So, what I did was create a .65 bushing at the bottom and I've just kind of…
Contents
-
-
-
-
-
(Locked)
Making the wheel8m 14s
-
(Locked)
Building the wheel spacer (rectangle, revolve, and mulibody)3m 58s
-
(Locked)
Importing parts (downloading files and 608 bearing)5m 25s
-
(Locked)
Building the base plate10m 2s
-
(Locked)
Designing the king pin6m 49s
-
(Locked)
Designing the hanger4m 34s
-
(Locked)
Making the bushings2m 4s
-
(Locked)
Creating the truck assembly5m 10s
-
(Locked)
Design the deck2m 28s
-
(Locked)
Putting it all together3m 3s
-
(Locked)
-
-