Join Gabriel Corbett for an in-depth discussion in this video Design the deck, part of Learning Onshape.
- [Narrator] The deck of the board is what we're going…to be standing off when we're going…to be riding a skateboard, and it's also…a place where we're going to be connecting those trucks to…so we can turn, and obviously, roll down the road.…A couple things to point out here,…and I want to show those right away.…So, first thing is the sketch.…Number one, let's go ahead and look at that one.…I'll click on the right plane, and see.…All I did here was define a little bit of a arch to this.…I have a little bit of a bendy board, so I stand on it…to kinda, a little bit of a shock absorber.…I've got an overall length, and I've got…a height of that arch.…
Okay?…I've also placed a location for…where I'd like the trucks to be.…And then, if I zoom in here, you can see…I've made a little line here that is…perpendicular to this line here,…which is also tangent to this line here.…So it's basically normal to that surface.…So I want to make sure that those trucks are…directly in a normal condition to the board…when I put that together, and the reason I did that,…
- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
1. Introduction to Onshape
2. Basic Part Modeling
3. Modeling Parts
4. Part and Assembly Drawings
Next steps1m 12s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.