Join Gabriel Corbett for an in-depth discussion in this video Creating revolved features, part of Learning Onshape.
- [Instructor] The revolve and the revolve cut feature…are one of the most fundamental types of modeling…you can do.…I'm gonna go ahead and create a new document.…Click on create, and I'm gonna type test number two.…It doesn't really matter, you can start with any document,…name it whatever you want.…We're just starting with a blank document.…Click on okay.…It's gonna create a new document workspace.…And by default, we automatically get a…parts studio, as well as an assembly.…Notice I'm over here in parts studio number one.…I'm gonna choose this front plane here,…and I'm gonna start a sketch.…
Now, the basic workflow is gonna be…the same for most things we're gonna do in Onshape.…We're gonna start a sketch on a face or plane,…then we're gonna do something to it,…like an extrude, like revolve, like a sweep.…In this case, we're gonna be doing a revolve.…So start with our sketch,…and I'm gonna make a very, very simple sketch here.…So let's go ahead and choose the front plane…so I'm looking straight down at that.…I'm gonna go ahead and hide these other planes…
- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
1. Introduction to Onshape
2. Basic Part Modeling
3. Modeling Parts
4. Part and Assembly Drawings
Next steps1m 12s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.