Join Gabriel Corbett for an in-depth discussion in this video Creating assemblies and mate connectors, part of Learning Onshape.
- [Narrator] In this movie we're going…to start working with building assemblies.…And really there's a couple key concepts to understand.…So the first thing you need to do…is create a couple parts to assemble together.…Now I've got a new document started up here.…It can be a blank document from whatever you're working with…or we can open up this one here, doesn't really matter.…Let's choose the top plane.…Let's make some really simple parts.…Click a sketch, let's start a sketch.…Let's start with a center point rectangle.…Let's just draw the rectangle.…Click on the extrude cut command.…I'll type in two inches over here, 2.0…and quickly create a solid.…
I'm gonna go ahead and hide these other planes.…This is my first solid.…Let's go over here on this right-hand side of that.…Click on starting a sketch.…Let's create a circle…and just kind of draw something like that.…And we'll do an extrude cut.…So we'll remove some material.…Click OK and there it is.…Alright, now I want to create a new part.…So I'm gonna go down here to the plus, create a part studio.…
Author
Gabriel Corbett
Released
9/16/2016- Modeling parts and working with Part Studios
- Creating sketches
- Building revolved and extruded features
- Trimming and extending sketch objects
- Creating offset geometry and holes
- Building assembles
- Importing parts
- Creating part and assembly drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome1m 52s
-
Using the exercise files1m 37s
-
Hardware and software1m 22s
-
-
1. Introduction to Onshape
-
Navigating Part Studios5m 50s
-
Skateboard project overview2m 43s
-
2. Basic Part Modeling
-
Creating sketches6m 39s
-
Using the extrude feature7m 52s
-
Creating holes3m 45s
-
-
3. Modeling Parts
-
Making the wheel8m 14s
-
Building the base plate10m 2s
-
Designing the king pin6m 49s
-
Designing the hanger4m 34s
-
Making the bushings2m 4s
-
Creating the truck assembly5m 10s
-
Design the deck2m 28s
-
Putting it all together3m 3s
-
-
4. Part and Assembly Drawings
-
Part drawings13m 16s
-
Assembly drawings5m 17s
-
-
Conclusion
-
Next steps1m 12s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating assemblies and mate connectors