Join Sean Colins for an in-depth discussion in this video Working with Recovery partitions, part of Imaging and Deploying Macintosh Computers.
…Another of the concerns we need to be aware…of whenever we're talking about creating images and deploying…them to Macs, is the recovery partition that's been…a part of every Mac since OS X Lion.…So what is your recovery HD partition?…Well, it is a hidden part of the internal…system that's going to help you to recover from problems.…In the event of trouble with your system.…So what can it help you with?…Well, as I said it's invisible so it doesn't show up and get…in your way while you're using your Mac, but if you need to…get into it you can reboot and hold down command and the letter…r on your keyboard or you can hold down the option key while booting.…
And you'll see a startup manager, and on the gray screen that…is the startup manager, you'll see little pictures of disks, and those little…pictures will indicate which disks that are attached to your system, or which…volumes that are attached to your system, have bootable operating systems on them.…And when you select your disk, you then hit the…enter key, and it will boot into the recover partition.…
Author
Released
7/16/2014- Exploring the monolithic and modular imaging methodologies
- Working with Fusion Drives and Recovery partitions
- Ensuring physical security and installing a firmware password
- Choosing source hardware
- Installing apps
- Building a complete monolithic master for imaging
- Deploying apps and accounts in a modular master system
- Building a base master
- Performing hard-drive-to-hard-drive imaging
- Exploring VLANs
- Performing network-to-network imaging
- Deploying using NetInstall or DeployStudio across a network
Skill Level Intermediate
Duration
Views
Related Courses
-
Small Office Networking to Connect, Share, and Print
with Garrick Chow3h 23m Intermediate
-
Introduction
-
Welcome1m 17s
-
Prerequisites6m 52s
-
-
1. Understanding Strategies
-
Planning a one-to-one deployment13m 14s
-
2. Hardware Concerns
-
Working with Fusion Drives4m 56s
-
-
3. Building a Monolithic Master system
-
Choosing source hardware4m 45s
-
Installing apps6m 6s
-
-
4. Building a Modular Master System
-
Deploying apps6m 16s
-
5. Hard-Drive-to-Hard-Drive Imaging
-
Configuring a complex workflow14m 24s
-
Building a modular workflow10m 7s
-
Deploying a modular image3m 42s
-
Deploying Boot Camp3m 47s
-
Deploying using Disk Utility8m 51s
-
6. Network Concerns
-
Understanding network speed4m 32s
-
Exploring VLANs8m 22s
-
7. Network-to-Network Imaging
-
Conclusion
-
Goodbye1m 9s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Working with Recovery partitions