Join Sean Colins for an in-depth discussion in this video Deploying using DeployStudio across a network, part of Imaging and Deploying Macintosh Computers.
…In this movie, I will talk about how…to create an image from DeployStudio across the…network, and then how to deploy that across…the network to a computer that you've NetBooted.…We will talk about unicast and multicast both in this movie.…And compare and contrast the two, and the way that you'll do your settings, and…what you'll do to your local network in order to accomplish either of the two.…All right, so let’s get started.…Right now we are looking at the screen of our server.…
We could be in the NetBoot set using…DeployStudio admin from there, but in this screen,…I can get into this a lot bigger and you can see a lot better details.…So we’re starting from here.…I’ve already logged into my DeployStudio admin console with…my username and password and I’m in the workflows area.…As you can see, I have modified the…default workflows, deleting a few and adding a couple.…I've changed the restore a master to restore a master via multicast and restore…a master via unicast specifically so that I can show you each of these two.…
Author
Released
7/16/2014- Exploring the monolithic and modular imaging methodologies
- Working with Fusion Drives and Recovery partitions
- Ensuring physical security and installing a firmware password
- Choosing source hardware
- Installing apps
- Building a complete monolithic master for imaging
- Deploying apps and accounts in a modular master system
- Building a base master
- Performing hard-drive-to-hard-drive imaging
- Exploring VLANs
- Performing network-to-network imaging
- Deploying using NetInstall or DeployStudio across a network
Skill Level Intermediate
Duration
Views
Related Courses
-
Small Office Networking to Connect, Share, and Print
with Garrick Chow3h 23m Appropriate for all -
Learning OS X Server App
with Sean Colins4h 10m Beginner
-
Introduction
-
Welcome1m 17s
-
Prerequisites6m 52s
-
-
1. Understanding Strategies
-
Planning a one-to-one deployment13m 14s
-
2. Hardware Concerns
-
Working with Fusion Drives4m 56s
-
-
3. Building a Monolithic Master system
-
Choosing source hardware4m 45s
-
Installing apps6m 6s
-
-
4. Building a Modular Master System
-
Deploying apps6m 16s
-
5. Hard-Drive-to-Hard-Drive Imaging
-
Configuring a complex workflow14m 24s
-
Building a modular workflow10m 7s
-
Deploying a modular image3m 42s
-
Deploying Boot Camp3m 47s
-
Deploying using Disk Utility8m 51s
-
6. Network Concerns
-
Understanding network speed4m 32s
-
Exploring VLANs8m 22s
-
7. Network-to-Network Imaging
-
Conclusion
-
Goodbye1m 9s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Deploying using DeployStudio across a network