Discover how to use the SOAP service through netcat to test a WeMo switch.
- [Instructor] Let's take a look at the Internet of things.…One of the popular home devices is the Belkin WeMo switch.…And I've got a new one powered up and not yet configured.…I'll set Acrylic Analyzer running,…and I'll look at what wireless networks…are available in my vicinity.…We can see there's a WeMo Switch 296 network available.…That's my Internet-addressable WeMo switch,…advertising itself, ready to be…connected to my home network.…The WeMo network is an open network,…so we don't need a password to connect.…
Let's close Acrylic now, and I'll change…my network connection from my home network to the switch.…OK, I've opened a command shell,…and I'll check my network connections.…OK, I can see that I've been assigned the IP address…10.22.22.149 by the switch.…And the gateway address, the switch itself…is 10.22.22.1.…I'm now a client on WeMo's own network.…
Let's have a look at what ports are available on the switch.…I can see two TCP ports open, the DNS service on port 53,…and the UP and P, plug-and-play service, on port 49152.…
Note: This course is part of our test prep series for the Certified Ethical Hacker exam. Review the complete exam objectives at https://www.eccouncil.org/programs/certified-ethical-hacker-ceh/.
- Selecting an antenna
- Configuring security
- Extracting WEP and network passwords
- Testing passwords
- Harvesting connections from rogue access points
- Attacking networks via Bluetooth
- Capturing wireless packets with Acrylic WiFi
- Heat mapping with Ekahau
- Wi-Fi sniffing with Wireshark
- Testing the Internet of Things