From the course: Learning PLC Ladder Logic: 2 Diving Deeper
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Solution 5: Using the software - Ladder Logic Tutorial
From the course: Learning PLC Ladder Logic: 2 Diving Deeper
Solution 5: Using the software
- [Instructor] So before we see the demo using the simulation software, let's just recall the process. So first of all, we have a part that we put on the conveyor. I'm pressing the Start Push button, the conveyor starts until it reaches the middle where it can be our steps, the paint is on for a couple of seconds. After the timer is done, the conveyor starts again until it gets to the box sensor where it gets loaded to a box until 10 parts are done. So this is how the program in the simulation software, you can see that starting from rung zero all the way to rung four is the control section. And then if I scroll down a little bit to the bottom, starting from rung five, all the way to the end which is rung eight is the output section. So I have them all as one program in one Ladder Logic. Now I'll scroll up a little bit more to the top and I would like to point out something regarding to the steps. You can…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
Introduction to sequence logic59s
-
(Locked)
Introduction to state diagrams2m
-
(Locked)
Example: Develop a state diagram43s
-
(Locked)
Solution: Develop a state diagram2m 26s
-
(Locked)
Understand bottle style logic1m 20s
-
(Locked)
Example: Sequential process1m 48s
-
(Locked)
Solution 1: Develop the state diagram3m 24s
-
(Locked)
Solution 2: Bottle logic for state 11m 50s
-
(Locked)
Solution 3: Control section2m 53s
-
(Locked)
Solution 4: Output section2m 28s
-
(Locked)
Solution 5: Using the software5m 12s
-
-