- [Voiceover] We're now ready to begin looking at the user interface. The user interface is made of several different components that you'll interact with at different times during the design process. First, on the left, you have the Browser, just above the Browser you have the Ribbon Bar, above the Ribbon Bar is the Quick Access Toolbar, on the right hand side you have the navigation tools and then finally you have the Graphics Window which is where the model is being displayed. We're gonna look at each of these individually, but for right now, I wanna start by exploring the ViewCube.
The ViewCube can be found in the upper right hand corner of the screen and you'll notice as you hover your mouse closer to it, the navigation tools, along with the ViewCube, become brighter or more enabled. They also present new capabilities. The Home icon shows up and the Options button shows up. The ViewCube is essentially linked to the model so that moving it will also move the model. For example, if we click on the front view here, you'll see that he model has rotated to the front view.
If we click the Home icon again, it's returned to its default Home view or whatever Home view's been assigned. As you hover over the ViewCube you'll notice different sections that light up in a blue color. This indicates that that area is clickable and will rotate your model to that location. If I simply click each corner on the top, you'll see that I'm rotating 90 degrees around the model, looking at each of those locations. Again, if I click my Home button, I return to a default Home view, or in this case, a view that was assigned to this view.
Let me show you real quickly how you can change your Home view. Let's say for example, rather than this slightly angled perspective, we wanted to see more of an isometric view. We can click on the corner of the ViewCube so that the orientation we want is viewed on the screen. Once you're in the proper orientation you can right click on the ViewCube, select Set Current View as Home, and I typically use Fit to View. What this does is it zooms the model in so that it fills up as much of the screen as possible so if I'm zoomed out for example, or looking at it from a different view in zoomed out, when you click the Home button you'll see that it rotates to the isometric view or the Home view and it fits the screen.
If for example you wanted to zoom in and you had an area you were working on that you wanted to be very specific about, you could zoom in on a specific area and repeat that process. Right click on the ViewCube, select Set Current View as Home, but instead pick Fixed Distance. This will allow you to zoom out, click your Home button and return to that specific view. I'm gonna go ahead and click the corner of the ViewCube again to zoom out and I'm gonna reset the Home view to be Fit to View. You can also change the labeled views on the model.
Say for example, right now, we have top, front and right side. If we clicked on the right side and say, for example, we expected this to be the front view, we can make a change to that as well. In the same fashion, we can right click on the ViewCube but this time select Set Current View As, and you have an option for top or front. I'm gonna go ahead and select front and you'll notice that the ViewCube now says that this is the front view even though we're looking at it from what I consider the right side view.
If you hit the Home button, you'll see that the Home view is maintained and you see top, left and front instead of top, front and right. This work comes in really handy if you're receiving files from other people. They may have their views set up in a way that doesn't fit your thinking and you can easily change it. I'm gonna go ahead and reset that front view so you can see it one more time and so that we can return the model to its original state by right clicking, selecting Set Current View As, and selecting front.
Now when we return to the Home view you can see we're back to top, front and right side as we were before. The next thing I wanna mention is the capabilities that are available when you're looking directly at one of the labeled views. If you select the front view for example, and hover near the ViewCube, you'll notice that a number of arrows show up that weren't there previously. They all work in a very similar fashion. We'll start with the ones in the upper right hand corner, the ones that are in a circular orientation. If you click on one of those it will maintain the current view, viewing it at the front, and rotate 90 degrees.
So for example after a fourth click, we're back to the exact same location we were previously. The other arrow works the exact same way just in the opposite direction. Each of the arrows that are around the outside of the ViewCube also rotate in 90 degree increments but instead of maintaining the current view, they will rotate to the next view on the ViewCube. If I'm looking at the front and I click the arrow on the top, I'll get the top view. If I'm looking at the top and I click the arrow at the top of the ViewCube, I'll get the back, except the model's upside down 'cause we've just flipped the viewpoint over 180 degrees.
Finally we'll click that arrow two more times and we've returned back to our original view.
Author
Released
3/21/2017- Reviewing interface changes
- Projecting and importing geometry
- Working with Autodesk AnyCAD
- Understanding part modeling
- Building parts with placed features
- Working with partial chamfers
Skill Level Beginner
Duration
Views
Related Courses
-
Learning Autodesk Inventor
with John Helfen2h 50m Beginner -
Autodesk Inventor Professional: Stress Analysis Tools
with Thom Tremblay25m 53s Intermediate -
Inventor 2016 Essential Training
with John Helfen6h 26m Beginner -
Autodesk Inventor 2017 New Features
with John Helfen41m 8s Intermediate
-
Introduction
-
Welcome33s
-
Certification overview1m 27s
-
Interface changes1m 41s
-
-
1. Basic Concepts
-
Home dashboard4m 30s
-
2. Leveraging the Project
-
Project file introduction5m 26s
-
Create a project4m 58s
-
Setting up the project file5m 11s
-
-
3. Navigating the Interface
-
Using the browser4m 41s
-
Using the ribbon bar3m 35s
-
Using the Marking menu3m 29s
-
4. Sketching Concepts
-
Introducing sketching4m 30s
-
Understanding constraints6m 12s
-
-
5. Create Sketch Geometry
-
Drawing lines6m 56s
-
Create rectangles and arcs11m 22s
-
Create splines8m 12s
-
Construction geometry6m 31s
-
Dimensioning4m 44s
-
Parameters5m 53s
-
-
6. Modifying Sketch Geometry
-
7. Work Features
-
Understanding work features4m 16s
-
Create offset work planes3m 23s
-
Create work planes7m 7s
-
-
8. Projecting and Importing Geometry
-
Projecting geometry8m 22s
-
Import AutoCAD data8m 47s
-
Autodesk AnyCAD3m 46s
-
-
9. Understanding Part Modeling
-
Part feature introduction6m 11s
-
Create a base extrusion feature10m 30s
-
Extrude enhancements2m 40s
-
Create revolves10m 11s
-
Create a sweep feature5m 28s
-
-
10. Building Parts with Placed Features
-
Adding placed holes4m 14s
-
Adding sketched holes3m 41s
-
Adding threaded holes5m 23s
-
Bi-directional holes1m 1s
-
Partial chamfers2m 59s
-
-
11. Create Patterns of Features
-
Mirroring part features3m 22s
-
Sketch pattern2m 46s
-
12. Create Sculpted Objects
-
T-Splines introduction2m 12s
-
Create a base form3m 12s
-
Taking advantage of symmetry5m 41s
-
-
13. Adding Parts to an Assembly File
-
Introduction to assemblies1m 43s
-
Placing components5m 23s
-
-
14. Using Constraints to Position Parts
-
Mate or Flush constraint7m 48s
-
Angle constraint3m 46s
-
Insert constraint2m 49s
-
Driving constraints6m 11s
-
Translational constraint1m 12s
-
Motion constraint6m 19s
-
Contact sets2m 37s
-
-
15. Assembly Visualization Techniques
-
Visual styles5m 27s
-
16. Create Drawing Views
-
Create section views5m 18s
-
Create detail views2m 41s
-
Create breakout views3m 18s
-
17. Create Basic Annotations
-
Create general dimensions5m 16s
-
Changing dimension precision2m 42s
-
-
Conclusion
-
Next steps1m 5s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Navigating using the ViewCube