From the course: Autodesk Inventor: Configurable Designs and Automation

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Creating multiple iAssembly configurations

Creating multiple iAssembly configurations - Inventor Tutorial

From the course: Autodesk Inventor: Configurable Designs and Automation

Start my 1-month free trial

Creating multiple iAssembly configurations

“

- [Teacher] In this video, we're going to take a look at our assembly and how we can create configurations. We do this by converting our assembly into what we call an iAssembly. Now, for this particular video, we're going to create three different configurations of our step ladder. The first one is going to be 46 inches high. We're gonna have a platform height of 30 inches. The base will be 18 inches with a five-degree taper on our front frame. We'll have two steps that are at 10 and 18 inches. The second one we're going to make a little bit taller. It will come in at 52 inches, but it's also going to be a little bit more narrow. We'll have a 32-inch platform height, 16-inch base at 3.8 degree taper, and then we'll have three steps that we have at eight, 16 and 24 inches. And finally we're going to make a larger step ladder, which will be 64 inches high, with a 45-inch platform, a 24-inch base at five-degree taper, we'll have four steps, and the steps are going to be at nine, 18, 27…

Contents