From the course: Autodesk Inventor 2019 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Create a sweep feature - Inventor Tutorial
From the course: Autodesk Inventor 2019 Essential Training
Create a sweep feature
- [Narrator] We're now ready to look at the sweep feature. In order to create a sweep, we need two things, we need a profile that's going to be swept and we need a path that it's going to be swept along. To begin we need a blank part file which I have open on the screen. I'm going to right-click and select New Sketch, and I'm going to select the XY plane to sketch on. And what we're going to do here is we're going to create a path that we can sweep a profile along. I'm going to start by right-clicking and selecting Create Line. Hover over the center of the sketch and left-click to start the line and I'm going to drag upward to about point 75 inches, it doesn't have to be exact, and I'm going to left-click. Now I could continue creating lines just by left-clicking anywhere but I'm going to show you a trick. I want to actually create an arc here. If you hover your line back to the end point on the previous line you'll notice a small gray dot up here. When you see that, if you left-click…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
Part feature introduction6m 11s
-
(Locked)
Create a base extrusion feature10m 30s
-
(Locked)
Create an extrusion to next face5m 35s
-
(Locked)
Extrude enhancements2m 40s
-
(Locked)
Create revolves10m 11s
-
(Locked)
Complex shapes with the Loft tool8m 48s
-
(Locked)
Add control to a loft by creating rails9m
-
(Locked)
Create a sweep feature5m 28s
-
(Locked)
Create a sweep feature with model edges2m 28s
-
-
-
-
-
-
-
-
-
-