Join John Helfen for an in-depth discussion in this video Changing dimension precision, part of Up and Running with Autodesk Inventor.
- View Offline
- Exercise Files
On the screen you can see the dimensions that we created.…One of the things you might notice is that the dimensions are only to two decimal points of precision.…Now typically I wouldn't recommend jumping in and changing a lot of settings in the drawing,…especially without talking to a CAD manager, because a lot of these standards are set.…But I know that the precision is something that people might want to change right out of the gate.…I'm going to take a minute to show you how to do this so that you can ensure that your…designs are documented properly for manufacturing.…To make this change, we're going to go to the Manage tab on the Ribbon bar.…
Under the Styles and Standards panel we're going to select Style Editor.…Now there's a lot of settings here, and we're not going to through all of them, we're most…specifically looking at Dimensions.…Even more specifically than that, we're looking for the default ANSI Dimensions.…Depending on the type of standard you've installed on your system, these may be slightly different…
- Navigating drawings with the View Cube and other navigation tools
- Sketching geometry
- Dimensioning parts
- Creating parameters
- Drawing circles, squares, and other shapes
- Creating extrusions
- Creating and managing constraints in assemblies
- Setting basic drawing dimensions
Skill Level Beginner
1. Basic Concepts
2. Navigating the Interface
4. Part Modeling
Next steps1m 20s
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.